33-4200 Tool

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0492436 334200 Tool MW

NOTE: (Tool set/striking device) For deflecting rear wheel flange when replacing wheel bearings. For safety reasons the special tool is blocked. The new hydraulic tool should be used for all types of repair work → Order number 81 64 2 160 009. [Blocked]

Fig 1: Identifying Tool (0492436)

Courtesy of BMW OF NORTH AMERICA, INC.

SI number

01 06 94 (801)

Consisting of:

8 = 0494630 Nut
NOTE: (Nut M20 and nut M20 flat) Nuts 33 4 204 are integrated in 33 4 201. 33 4 204 is only continued as a spare part number. [Released]
1 = 0492437 Rod
NOTE: (Impact rod with handle) [Released]
1 = 0492438 Rod
NOTE: (Impact rod) With end part and nut. Contained in 33 4 201. [Discontinued]
5 = 0493967 Adapter
NOTE: For pulling out the wheel control joint on E53, E83. [Released]
3 = 0492439 Weight
NOTE: (Weight) Impact weight. For safety reasons the special tool is blocked. The new hydraulic tool should be used for all types of repair work → Order number 81 64 2 160 009. [Discontinued]