LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3072 (Rear Axle - Special Tools) >> Rear Axle >> 33-3330 Device

33-3330 Device

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0492322 333330 Device Minimum set: Mechanical tools MW

NOTE: For removing and installing ball joint and rubber mount in semi-trailing arm [released]

Storage Location

B14

SI number

01 10 90 (288)

Consisting of:

  1. = 0492323 Holding sleeve
    NOTE: (Spacer sleeve) For pulling out/series: E36, E46 [released]
    Fig 1: Identifying Device (0492322)
    G04745593Courtesy of BMW OF NORTH AMERICA, INC.
  2. = 0492324 Holding sleeve
    NOTE: (Extraction sleeve) Series: E36, E46 [released]
  1. 4 = 0492326 Holding sleeve
    NOTE: (Spacer sleeve) For installing the ball joint, series: E31, E36, E38, E39, E46, E65, E66, E85 [released]
  2. 3 = 0492325 Spindle
    NOTE: (Spindle with thrust nut) Replaced by 33 3 010/0 496 552 [replaced]