33-3200 Tool

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0492260 333200 Tool MW

NOTE: (Press-out/-in tool set) For pressing the rubber mount out of and into the control arm special tools 33 3 202 and 33 3 203 for E87 and E90 [Released]

Storage Location

B13

SI number

01 05 90 (207)

Consisting of:

= 0492261 Bush
NOTE: For accommodating control arm when pressing out rubber mount Series: E31 Discontinued, only available as part of complete tool [Cannot be ordered individually]
= 0492262 Synchronising key
NOTE: For pressing out rubber mount Series: E31, E46, E85, F01, F02 Discontinued, only available as part of complete tool [Cannot be ordered individually]
= 0492263 Holding sleeve
NOTE: (spacer sleeve) For pressing rubber mount into control arm Series: E31, E46, E85, F01, F02 Discontinued, only available as part of complete tool [Cannot be ordered individually]

Fig 1: Identifying Tool (0492260)

Courtesy of BMW OF NORTH AMERICA, INC.