LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3072 (Rear Axle - Special Tools) >> Rear Axle >> 33-0030 Device

33-0030 Device

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0496495 330030 Device MW

NOTE: For removing and installing rubber mount of rear axle final drive mounting at rear. [Released]

Storage Location

B25

SI number

01 18 08 (482)

Consisting of:

  1. = 0496507 Washer
    NOTE: Removing rubber mount [discontinued]
    Fig 1: Identifying Device (0496495)
    G06876289Courtesy of BMW OF NORTH AMERICA, INC.
  2. = 0496508 Bush
    NOTE: Removing rubber mount [discontinued]
  3. = 0496509 Washer
    NOTE: Installing rubber mount [discontinued]
  4. = 0496510 Washer
    NOTE: (Shaped washer) Installing rubber mount [discontinued]
  5. = 0496511 Spindle
    NOTE: (Spindle M14x1.5) Discontinued, only available via complete tool [not available separately]
  6. = 0496512 nut
    NOTE: (Nut M14x1.5 with thrust bearing) Discontinued, only available via complete tool [not available separately]