33-0010 Synchronising key

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0496390 330010 Synchronising key MW

NOTE: (Synchronising key (2 x)) For removing and installing rubber mount in rear axle support. [Released]

Storage Location

A25

SI number

01 18 08 (482)

Consisting of:

= 0496402 Synchronising key
NOTE: (Pressure pieces (2 pieces)) discontinued, only available via complete tool [not available individually]

Fig 1: Identifying Synchronising Key (0496390)
Courtesy of BMW OF NORTH AMERICA, INC.
= 0496403 Screw
NOTE: (countersunk screw M6x20 (4 pieces)) discontinued, only available via complete tool [not available individually]