22 32 050 Replacing crossmember for transmission mounting (N63)
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove rear UNDERBODY PROTECTION .
- Support transmission with lifter.
Release screws (1) and (2).
Remove transmission cross-member.
Tightening torque 22 32 3/4AZ .