54 37... Gauging roof module brackets: Notes
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2013 BMW 328i, 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 335i, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 251
- 00 9 450
- 54 0 140
- 54 0 141
- 54 0 142
- 54 0 143
- 54 0 180
IMPORTANT:
The roof module brackets are gauged and the screw connection sealed at the factory.
Gauging of the brackets is only to be carried out after a repair to the body.
It is necessary in the warranty period to consult the country-specific hotline before opening the screw connection seal.
Gauging of the brackets is only to be carried out after a repair to the body.
It is necessary in the warranty period to consult the country-specific hotline before opening the screw connection seal.
Necessary preliminary tasks:
- Align basic gauge
IMPORTANT:
Always install and remove roof module gauge with 2 helpers.
To prevent damaging the roof module gauge, set the gauge down only in the transportation crate or on brackets.
The roof module gauge is a highly sensitive measuring instrument which reacts even to light impacts with distortion.
The roof module gauge must be checked for dimensional accuracy on a master gauge after being subjected to impact or dropped.
To prevent damaging the roof module gauge, set the gauge down only in the transportation crate or on brackets.
The roof module gauge is a highly sensitive measuring instrument which reacts even to light impacts with distortion.
The roof module gauge must be checked for dimensional accuracy on a master gauge after being subjected to impact or dropped.