54 37 047 Removing and installing/replacing trim panel for cover flap
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2013 BMW 328i, 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 335i, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Necessary preliminary tasks:
- Open rear module partly and support it
NOTE:
Shown removed here for purposes of clarity.
Release bolt of trim panel for cover flap (1) at the designated sites.
Tightening torque: 8 Nm