LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2973 (Engine And Transmission Mounting - Repair (N54)) >> Transmission Suspension, Automatic Transmission >> 22 32 001 Replacing rubber mount for transmission mounting >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

Unfasten screws (1) and nuts (2).

Remove transmission cross-member.

Remove rubber mount from transmission cross-member.

Tightening torque 24 71 1AZ/2AZ.

NOTE: Illustration similar.
Fig 1: Identifying Transmission Cross-Member Screws And Nuts
G08419494Courtesy of BMW OF NORTH AMERICA, INC.