22 11 011 Replacing left engine mount AWD (N54)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove left engine support arm .
.

Release screws (1) and remove engine mount (2).

Tightening torque 22 11 1AZ .

Illustration similar.

Fig 1: Identifying Screws And Engine Mount

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lug (1) of engine mount must point to middle of vehicle.

Engine mount designations:

Right engine mount

Even component number

Left engine mount

Odd component number

Fig 2: Identifying Lug
Courtesy of BMW OF NORTH AMERICA, INC.