LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2971 (Cooling System - Repair (N54)) >> Coolant, Checking Cooling System >> 17 00 008 Draining and adding coolant (N54, N54T) >> Lifetime coolant filling

Lifetime coolant filling

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

Never reuse used coolant!

When replacing and removing components which rely on the corrosion protection effect of the coolant, it is essential to change the coolant. The cooling system must therefore be drained and refilled.

In the case of other removal work involving the draining of part quantities of coolant, replace these quantities which have been drained with new coolant.

Installation note: 

Use only recommended coolant. Observe mixture ratio. See COOLING SYSTEM - OPERATING FLUIDS .

scientia non olet · About LEMON Manuals