18 20 Exhaust system suspension
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - EXHAUST SYSTEM SUSPENSION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Clamp to front pipe holder | N54 / N54T | M8 x 49 | 19 Nm | |
| 2AZ Holder of primary catalytic converter to primary catalytic converter | N54 / N54T | BM8 | 19 Nm | |
| 3AZ Front pipe holder to retaining plate | N54 / N54T | M8 x 20 | 19 Nm | |
| 4AZ Rear silencer suspension | N54 / N54T | M8 | 19 Nm | |
| 5AZ Retaining plate to VTG | N54 / N54T | M8 x 35 | 19 Nm | |
| 6AZ Preliminary pipe bracket to transmission | N54 / N54T | M8 x 16 | 19 Nm | |
| 7AZ Retaining plate to transmission | N54 / N54T | BM8 | 21 Nm | |
| 8AZ Exhaust system to front pipe bracket | N54 / N54T | BM8 | 21 Nm | |
| 9AZ Centre silencer to rear silencer | N54 / N54T | M10 | 43 Nm |