21 21 Clutch Disc and Drive Plate
WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH DISC AND DRIVE PLATE - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Work instruction | Measure | |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 8.8 | Replace screws | 25 Nm |
| E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 10.9 | Replace screws | 34 Nm | |
| Clutch to flywheel With ZNS bolts | Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail | |||
| S85 / S65 | Jointing torque | 15 Nm | ||
| Torque angle | 25 ° | |||
| N52, N53, N52K M47T2, N45T, N54, N46T, N43, N45K, N47, M57T2, N47S, N62TU | M8 10.9 | Jointing torque | 15 Nm | |
| Torque angle | 90° ± 5° |