Taper roller bearing
WARNING: This page does not describe the selected car, but rather 526 other vehicles, including the 2020 BMW X1, 2019 BMW i8, 2019 BMW i3, 2019 BMW Z4, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
High-temperature multipurpose grease is used to grease the taper roller bearing.
Grease filling in the wheel hub 50 g and in the wheel hub protective cap 20 g per wheel.
| Trade name | BMW part number |
|---|---|
| BMW part number | 83 23 9 407 845 |
The wheel hub protective caps must always be replaced and glued into the wheel hubs during installation with the following adhesive.
| Trade name | BMW part number |
|---|---|
| Loctite No. 638 | 81 22 9 407 420 |