Grease For Flange Nut And Input Flange, Glue For Threads Of Flange Nut
WARNING: This page does not describe the selected car, but rather 526 other vehicles, including the 2020 BMW X1, 2019 BMW i8, 2019 BMW i3, 2019 BMW Z4, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
The following grease should be used for greasing the contact surfaces of the flange nut to the bearing inner ring and to the insert nut, and for greasing the face of the drive flange.
The Drei Bond glue is to be used for the threads of the flange nut.
| Trade name | BMW part number | Container size |
|---|---|---|
| Castrol Optitemp HAT LF1 | 83 23 0 417 754 | 50g tube |
| Drei Bond adhesive, type 1385 | 83 19 0 417 376 | 50g tube |