SI number

WARNING: This page is about a different car, the 2011 BMW M3, 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

01 22 97 (239)

Consisting of:

1 = 0493157 Plate

NOTE: (Pressure plate) For removing and installing the spring cup

Fig 1: Identifying Device (24-2310)

Courtesy of BMW OF NORTH AMERICA, INC.

2 = 0493158 Spindle

NOTE: (Spindle with pressure plate) Spindle M14x1.5, nut M14, pressure plate and washer/For removing and installing the spring cup

3 = 0493159 Pin

NOTE: (Guide pin (2 pieces)) For fixing the gaskets and the intermediate plate on the intermediate case

4 = 0493160 Bush

NOTE: (Slip bush) For installing the piston in the cylinder of the intermediate plate