LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2935 (Slide/Tilt Roof - Repair - E91) >> 5413 Electrical Sun Roof Components >> 54 13 150 Removing and installing rear cross-member >> Necessary preliminary work

Necessary preliminary work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws in marked area.

Tightening torque: 54 12 03AZ .

Feed cross-member (2) out of wiring harness (1) during removal.

Installation note: 

Pitch cables must be correctly laid diagonally in guide.

Fig 1: Locating Feed Cross-Member Wiring Harness
G05507244Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals