Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Remove GLASS SLIDE/TILT SUNROOF
- Remove CONTROL UNIT FOR GLASS SLIDE/TILT SUNROOF
- Remove DRIVE
Release screws in marked area.
Tightening torque: 54 12 03AZ .
Feed cross-member (2) out of wiring harness (1) during removal.
If necessary, release fabric adhesive tape and replace.
Installation:
Pitch cables must be correctly located in guide