Necessary preliminary work
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Headlight removed for purposes of clarity.
Unlock both retaining tabs and remove protective cap (1) in direction of arrow from headlight (2).
Installation note:
Protective cap (1) must be correctly engaged.
Check seal.
Replace protective cap (1), if applicable.
Observe NOTES REGARDING REPLACEMENT OF THE PROTECTIVE CAP .
Grip bulb holder (2) on both sides and pull in direction of arrow out of headlight.
Detach bulb (1) from bulb holder (2).
Remove bulb (1).
Installation note:
- Make sure bulb (1) is exactly seated in headlight.
- Note BULB TYPE .