63 21 101 Replacing sealing frame for left (or right) rear light (on side panel)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR LIGHT
Detach all remnants of sealing frame (1) from rear light (2).
Clean bonding surface and allow to dry.
Make sure sealing frame (1) is correctly bonded all round on rear light (2).
Installation:
Make sure guide (3) is correctly seated in side panel.