11 22 500 Removing and installing or replacing flywheel (M52 / S52 / M52TU / M54 / S54): Installation:

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.

Check dowel sleeve for damage and correct installation position.

Fig 1: Checking Dowel Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.

Position of dowel sleeve (1) in dual-mass flywheel is identified by two notches next to associated bolt hole.

Fig 1: Positioning Dowel Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.

Clean thread and install new micro-encapsulated screws.

Tightening torque 11 22 1AZ. Refer to 11 22 FLYWHEEL .

Fig 1: Locating Micro-Encapsulated Screws

Courtesy of BMW OF NORTH AMERICA, INC.