37 14 512 Replacing rear ride-height sensor: Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Release screws (1) and remove ride-height sensor from bracket (2).
Installation:
Sensor lever (3) must point from ride-height sensor in direction of screw fastening point (arrow) of bracket.
Tightening torque 37 14 1AZ .