LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2928 (Airbag, Door Locks & Anti-Theft Systems, Entertainment Systems, Navigation System - Repair - E91) >> 6582 Central Display And Operating Unit >> 65 82 050 Removing and installing (replacing) on-board monitor

65 82 050 Removing and installing (replacing) on-board monitor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .
IMPORTANT: Proceed with care so as to avoid damaging the on-board monitor and adjoining trims.

Release screws (1).

Fold out on-board monitor (2) in direction of arrow.

Fig 1: Removing On-Board Monitor
G04753750Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Installation: 

Ensure correct cable routing.

Remove on-board monitor (2).

Fig 2: Identifying Plug Connections And On-Board Monitor
G04753751Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out programming/coding.

scientia non olet · About LEMON Manuals