65 77 604 Replacing sensor mat (OC3 mat) for passenger seat occupancy detector
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Note AIRBAG SAFETY INSTRUCTIONS
!
Incorrect handling can activate airbag and cause injury.
Incorrect handling can activate airbag and cause injury.
WARNING:
US/CDN front passenger seat (with OC3 mat) only:
The OC3 mat can only be removed in conjunction with the padding from the seat cover.
If OC3 mat or padding is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW diagnosis system.
The OC3 mat can only be removed in conjunction with the padding from the seat cover.
If OC3 mat or padding is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW diagnosis system.
Operation for replacing the OC3 mat in conjunction with padding and seat cover is described in:
- Remove padding for front seat . See 5215400 REPLACING SEAT COVER FOR LEFT OR RIGHT FRONT SEAT (SPORT/MANUAL) or 5213400 REPLACING SEAT COVER ON LEFT OR RIGHT FRONT SEAT (NORMAL/MANUAL)
Enabling seat occupancy detector (OC3 mat):
- Connect BMW programming system
- Code airbag control unit
- Clear fault memory if necessary