65 13 110 Removing and installing/replacing speaker (in molded roofliner)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Lever out trim (1) along dotted line with special tool 00 9 340 and remove.

Installation:

Make sure speaker cover is completely engaged in molded roofliner.

Fig 1: Removing Trim Along Dotted Line Using Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Tabs (1) on speaker cover must not be damaged.

Fig 2: Identifying Tabs

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1), feed out speaker downwards and disconnect associated plug connection.

Installation:

Insert speaker first in mounting with guide lugs (2), then fold upwards.

Speaker must be heard and felt to snap into place.

Fig 3: Identifying Screws And Guide Lugs

Courtesy of BMW OF NORTH AMERICA, INC.