41 62 000 Removing and installing rear lid
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove UPPER REAR WINDOW FRAME TRIM
- Disconnect all plug and socket cable connections on rear lid.
NOTE:
This work step must be carried out with a second person assisting.
Carry over the work step shown symmetrically to the other side of the vehicle.
Unfasten screws (1).
Tightening torque 41 62 1AZ .
Remove rear lid.