41 51... Replacing door hinge bushing (door removed)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Set of special tools 41 1 150 comprises:

Bush 41 1 151

Screw 41 1 152

Fig 1: Identifying Bush (41 1 151) And Screw (41 1 152)

G04726967

Courtesy of BMW OF NORTH AMERICA, INC.

Cut off hinge bushing in area (1) with chisel.

Drive out remainder of hinge bushing with punch.

Fig 2: Identifying Hinge Bushing Cut Off Area

G04726968

Courtesy of BMW OF NORTH AMERICA, INC.

Insert screw 41 1 152 with new hinge bushing (2) into hinge.

Screw bushing 41 1 151 with flat end (3) pointing upwards onto screw41 1 152.

Turn bushing 41 1 151 until taper (1) borders hinge bushing.

Unscrew bushing 41 1 151 again.

Fig 3: Identifying Hinge Bushing With Special Tools

G04726969

Courtesy of BMW OF NORTH AMERICA, INC.

Twist bushing 41 1 151 with flat end (1) onto screw41 1 152.

Turn bushing 41 1 151 until gap dimensions (2) are identical.

Fig 4: Identifying Twist Bushing (41 1 151 And 41 1 152)

G05506147

Courtesy of BMW OF NORTH AMERICA, INC.