Necessary preliminary tasks

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, 2009 BMW 328i, and 2008 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Remove PROPELLER SHAFT from transmission and center bearing

NOTE: To protect universal joints, tie back propeller shaft in area of center mount.

Release screws and remove flexible disc (1) from propeller shaft.

IMPORTANT: Replace shiny ZNS bolts and self-locking nuts.

Tightening torque and angle of rotation: 26 11 1AZ .

Fig 1: Identifying Flexible Disc, ZNS Bolts, Self Locking Nuts And Flange Arms

Courtesy of BMW OF NORTH AMERICA, INC.