LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2920 (Electrical Drives - Repair - E91) >> 6762 Drive, Power Window >> 67 62 020 Removing and installing/replacing flat motor for rear left or right power window regulator >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1), tightening torque 51 35 1AZ .

Detach flat motor for power window unit (2) in direction of arrow from power window unit (3).

Installation: 

Fit flat motor for power window unit (2) exactly on teeth of power window unit.

Fig 1: Removing Flat Motor From Power Window Unit
G04728049Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals