LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2920 (Electrical Drives - Repair - E91) >> 6731 Drive, Seat Adjustment >> 67 31 531 Removing and installing/replacing drive unit for backrest angle adjustment >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Unlock plug connections (2) and disconnect.

Release screws (1).

Remove drive for backrest angle adjustment from flange.

Installation: 

Make sure drive shaft is correctly seated in gearbox.

Fig 1: Identifying Screws And Plug Connections
G06852179Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals