LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2918 (Front Axle - Repair - E91) >> 3135 Stabilizer Bar >> 31 35 021 Replacing rubber mounts of stabilizer retaining fixture on front axle carrier >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Remove retaining bracket (1) and rubber mount (2) on both sides.

Installation: 

Keep retaining bracket (1), rubber mount (2) and stabilizer clean and free from oil and grease.

Fig 1: Identifying Retaining Bracket And Rubber Mount On Front Axle Carrier
G04726315Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals