31 35 005 Removing and installing/replacing push rod (stabilizer link) for left/right stabilizer

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Note (M3 only):

Make sure stabilizer link is installed in correct position.

Connection, stabilizer link to spring strut
Connection, stabilizer link to stabilizer

Fig 1: Identifying Connections Of Stabilizer Link To Spring Strut And Stabilizer Link To Stabilizer

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove bracket for brake hose.

Release nut (3) and remove stabilizer link (2).

Installation:

Replace self-locking nuts.

Tightening torque 31 35 2AZ .

Fig 2: Identifying Stabilizer Link With Nuts

Courtesy of BMW OF NORTH AMERICA, INC.