Necessary preliminary tasks

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Remove brake disk See 3411220 REMOVING AND INSTALLING/REPLACING BOTH FRONT BRAKE DISCS (BREMBO) or 3411220 REMOVING AND INSTALLING OR REPLACING BOTH FRONT BRAKE DISCS

Release screws (1).

Press wheel bearing (2) off swivel bearing with a suitable tool.

Installation:

Replace microencapsulated screws.

Tightening torque 31 21 1AZ .

Fig 1: Identifying Wheel Bearing With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When reusing, recut all the threads in the wheel bearing.

Keep contact surface (1) of swivel bearing and wheel bearing clean and free from oil and grease.

Fig 2: Identifying Contact Surfaces Of Swivel Bearing And Wheel Bearing

Courtesy of BMW OF NORTH AMERICA, INC.