LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2918 (Front Axle - Repair - E91) >> 3110 Front Axle Suspension >> 51 47 491 Removing and installing/replacing rear underbody protection >> Single-part underbody protection (except E90/E91/E92 AWD)

Single-part underbody protection (except E90/E91/E92 AWD)

WARNING: This page is about a different car, the 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 328i, and 2009 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Pull underbody protection (2) in direction of arrow out of bracket (3).

Installation: 

Ensure correct seating.

Centre underbody protection (2) and tighten down screws (1).

Fig 1: Removing Underbody Protection From Bracket
G04726248Courtesy of BMW OF NORTH AMERICA, INC.