Only when refilling!
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Use only recommended coolant. See COOLING SYSTEM - OPERATING FLUIDS .
Observe mixture ratio. See COOLING SYSTEM - OPERATING FLUIDS .
Perform filling operation slowly.
Adjust coolant level to MAX.
Close coolant expansion tank.
Installation:
Close cap (1) until the arrow marks line up.
IMPORTANT:
The following venting procedure is necessary e.g. when a part is replaced in the cooling system or when the cooling system is refilled.