LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2916 (Automatic Transmission - Repair - E91) >> 2414 Mechanical Attachments >> 24 14 002 Replacing selector shaft seal (GA6HP19) >> Version 1:

Version 1:

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Grip clamping sleeve (1) and slacken nut (2).

Detach retainer (3) downwards using a screwdriver.

Pull cable (4) out of holder.

Installation: 

Adjust GEARSHIFT LEVER .

Fig 1: Identifying Clamping Sleeve, Retainer, Cable And Nut
G04726075Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals