24 11 013 Removing and installing/sealing or replacing transmission sump (GA6L45R): Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Replace oil drain plug.

Fig 1: Identifying Oil Drain Plug

G04726112

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew all bolts.

Remove transmission sump (1).

Installation:

Screw in bolts (1 to 17) in specified order until bolt heads make contact.

Tightening torque: 24 11 5AZ .

Fig 2: Transmission Oil Sump Bolts Tightening/Loosening Sequence

G04726113

Courtesy of BMW OF NORTH AMERICA, INC.

Clean sump magnet (1) and check for metal filings/borings.

Remove gasket (2) from transmission sump.

Clean sealing faces and groove with a cloth.

Insert new gasket in transmission sump groove.

IMPORTANT: Do not degrease transmission sump with cleaning agent.

Fig 3: Identifying Sump Magnet And Gasket

G04726114

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

The gasket is correctly installed when it is engaged in the locating openings of the transmission sump.

Fig 4: Locating Gasket Hole

G04726115

Courtesy of BMW OF NORTH AMERICA, INC.