24 00 018 Adjusting selector lever (GA6L45R) AWD

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Check cable for ease of movement.
Move selector lever to "P" position.

Grip clamping sleeve (1).

Loosen nut (2).

Press selector lever (3) forward into park position. Press cable (4) in direction of arrow, then release again.

Grip clamping sleeve (1).

Tighten nut (2).

Tightening torque: 25 16 2AZ

Fig 1: Clamping Sleeve, Nut, Selector Lever And Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Move selector lever to "P" position.

Check whether parking gear is engaged by turning propeller shaft.