LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2914 (Body Equipment - Repair - E91) >> Trim, Covers, Handle Trim >> 51 13 025 Removing and installing/replacing left or right trim on engine hood/bonnet

51 13 025 Removing and installing/replacing left or right trim on engine hood/bonnet

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and remove trim (2) in upwards direction.

Tightening torque 51 13 7AZ .

Fig 1: Removing Trim
G06853838Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Guides (1) on trim (2) must not be damaged.

Fig 2: Identifying Guides On Trim
G06202399Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals