Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Close door windows
Remove SOUND INSULATION in front area only

NOTE: Secure rear door against falling closed.

Release screw (1).

Tightening torque 51 22 3AZ .

Remove seal (2).

Installation:

Seal (2) must not be damaged.

Make sure seal (2) is correctly seated.

Fig 1: Identifying Seal And Screw

G06202605

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 22 4AZ .

Fig 2: Identifying Screws

G06202606

Courtesy of BMW OF NORTH AMERICA, INC.

Remove door retainer (1) via cutout (2).

Fig 3: Removing Door Retainer Via Cutout

G04749739

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of door retainer (3) must not be damaged:

Hinge
Thread

Fig 4: Identifying Door Retainer With Hinge And Thread

G04749740

Courtesy of BMW OF NORTH AMERICA, INC.