Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove REAR BUMPER TRIM

NOTE: The operation is described on the left side; proceed in the same way for the right side.

E93 only:

Release antenna holders (1 and 2) from holder (3).

Installation:

If necessary, replace faulty aerial holders (1 and 2).

Fig 1: Identifying Antenna Holders And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, disconnect plug connection at RDC trigger transmitter.

Release screws (1 and 2).

Release nut (3) and remove holder (4).

Fig 2: Identifying Holder With Nut And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) must not be damaged or missing.

E90/E91 only:

Catches (2) must not be damaged or missing.