51 45 263 Removing and installing/replacing instrument panel trim on right: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Carefully release trim (1) with special tool 00 9 321 from retainers (3) and lock pins (2).

Fig 1: Removing Trim From Retainers And Lock Pins Using Special Tool (00 9 321)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (Hutfix) (1) must be seated in associated mountings.

Replace clips (Hutfix) (1) if they were released during removal.

A Turn clip (Hutfix) (1) with screwdriver to left by approx. 90°
B Lever out clip (Hutfix) (1) from below

Fig 2: Removing Clips From Decorative Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lock pins (1) and retainers (3) on trim (2) must not be damaged.

If necessary, replace lock pins (1) and retainers (3).

Fig 3: Identifying Pins And Retainers On Trim

Courtesy of BMW OF NORTH AMERICA, INC.