4.2 Components with pre-fitted adhesive tape

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Pull off liner* from adhesive side (if adhesive area is large, do not pull off liner completely)
Align component in correct position on vehicle
Press down component over entire adhesive area

* Liner is the protective film on the adhesive tape