LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2914 (Body Equipment - Repair - E91) >> Gaskets, Seals, Loose Body Components >> 51 71 412 Removing and installing rear spoiler >> Adjusting rear spoiler

Adjusting rear spoiler

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Observe GAP DIMENSIONS .

Press on rear spoiler (1) and measure negative protrusion of rear spoiler (1) to rear window (2) with special tool 51 0 010 .

A= 1 ± 1 mm

If necessary, adjust rear spoiler (1) by means of adjusting screw (3).

Fig 1: Identifying Adjusting Screw, Rear Spoiler And Window
G04791918Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals