51 21 003 Replacing door detent (lock striker), front left or right
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Release screws (1) and remove door detent (2).
Installation:
If necessary, carry out basic adjustment by way of notches (3) on lock striker (2).
Notches (3) must be vertical to B-pillar.
Tightening torque 51 21 2AZ .