Pulling cutting wire into vehicle

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Cut off wire end (1) at an angle and pierce adhesive bead (2) with it.
Wire end must be bent towards window glass.

Fig 1: Identifying Wire Cutting End And Adhesive Bead

Courtesy of BMW OF NORTH AMERICA, INC.