51 31 021 Removing and installing/replacing rubber frame for windscreen (top): Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove both gutter strips on windscreen
IMPORTANT:
Rubber frame (1) features an aluminum section inlay (2).
If necessary, detach adhesive tape (9) between rubber frame (1) and roof outer skin.
If necessary, remove fitted spacer buffers (8).
Carefully unwind rubber frame (1) (windscreen breakage).
If necessary, detach adhesive tape (9) between rubber frame (1) and roof outer skin.
If necessary, remove fitted spacer buffers (8).
Carefully unwind rubber frame (1) (windscreen breakage).
NOTE:
Tear-off lip (5) may be stuck to adhesive (4).
When rubber frame (1) is removed, tear-off lip (5) can tear off and remain in vehicle.
When rubber frame (1) is removed, tear-off lip (5) can tear off and remain in vehicle.
- 3 Windscreen
- 6 Bridge
- 7 Pinched butyl