51 75 001 Removing and installing/replacing left or right underbody cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Work shown on E90 by way of example, deviations in detail are possible in other models.

Fig 1: Identifying Clips, Screws And Underbody Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release clips (1).

Release screws (2).

Remove underbody cover (3).

Installation:

Replaced damaged clips (1).

Make sure underbody cover (3) is correctly seated.