LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2914 (Body Equipment - Repair - E91) >> Floor, Luggage Compartment, Engine Compartment Trim Panels >> 51 47 491 Removing and installing/replacing rear underbody protection >> Two-part underbody protection

Two-part underbody protection

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Detach underbody protection (2) from bracket (3) and remove.

Installation: 

Ensure correct seating.

Center underbody protection (2) and tighten down screws (1).

Fig 1: Removing Underbody Protection From Bracket
G04726249Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals