51 47 490 Removing and installing/replacing front underbody protection: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 BMW 328xi, 2012 BMW 328i, 2011 BMW 328xi, 2011 BMW 328i, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is shown on the E87 by way of example. There may be differences in detail in the case of other models.
Release screws (1).
Pull underbody protection (2) forward under bumper trim (3).
Installation:
Center underbody protection (2) and tighten down screws (1).